Manual Testing Interview Q/A -Part 4

Q47. What is Requirement Traceability Matrix?

The Requirements Traceability Matrix (RTM) is a tool to make sure that project requirement remain same throughout the whole development process. RTM is used in the development process because of following reasons:

• To determine whether the developed project is meet the requirements of the user.
• To determine all the requirements given by the user
• To make sure the application requirement can be fulfilled in the verification process.

Q48. What is difference between Pilot and Beta testing?

The differences between these two are listed below:

• A beta test when the product is about to release to the end user whereas pilot testing take place in the earlier phase of the development cycle.
• In beta testing application is given to a few user to make sure that application meet the user requirement and does not contain any showstopper whereas in case of pilot testing team member give their feedback to improve the quality of the application.

Q49. Describe how to perform Risk analysis during software testing?

Risk analysis is the process of identifying risk in the application and prioritizing them to test. Following are some of the risks:

1. New Hardware.
2. New Technology.
3. New Automation Tool.
4. Sequence of code delivery.
5. Availability of application test resources.

We prioritize them into three categories these are:

• High magnitude: Impact of the bug on the other functionality of the application.
• Medium: it can be tolerable in the application but not desirable.
• Low: it can be tolerable. This type of risk has no impact on the company business.

Q50. What is difference between Master Test Plan and Test Plan.

The differences between Master Plan and Test Plan are given below:

• Master Test Plan contains all the testing and risk involved area of the application where as Test case document contains test cases.
• Master Test plan contain all the details of each and every individual tests to be run during the overall development of application whereas test plan describe the scope, approach, resources and schedule of performing test.
• Master Test plan contain the description of every tests that is going to be performed on the application where as test plan only contain the description of few test cases. during the testing cycle like Unit test, System test, beta test etc
• Master Test Plan is created for all large projects but when it is created for the small project then we called it as test plan.

Q51. How to deal with not reproducible bug?

Ans. A bug cannot be reproduced for following reasons:

1. Low memory.
2. Addressing to non available memory location.
3. Things happening in a particular sequence.

Tester can do following things to deal with not reproducible bug:

• Includes steps that are close to the error statement.
• Evaluate the test environment.
• Examine and evaluate test execution results.
• Resources & Time Constraints must be kept in point.

Q52. What are the key challenges of software testing?

Following are some challenges of software testing:

1. Application should be stable enough to be tested.
2. Testing always under time constraint
3. Understanding the requirements.
4. Domain knowledge and business user perspective understanding.
5. Which tests to execute first?
6. Testing the Complete Application.
7. Regression testing.
8. Lack of skilled testers.
9. Changing requirements.
10. Lack of resources, tools and training

Q53. What is difference between QA, QC and Software Testing?

Quality Assurance (QA): QA refers to the planned and systematic way of monitoring the quality of process which is followed to produce a quality product. QA tracks the outcomes and adjusts the process to meet the expectation.

Quality Control (QC): Concern with the quality of the product. QC finds the defects and suggests improvements. The process set by QA is implemented by QC. The QC is the responsibility of the tester.

Software Testing: is the process of ensuring that product which is developed by the developer meets the user requirement. The motive to perform testing is to find the bugs and make sure that they get fixed.

Q54.What is Exhaustive Testing?

Exhaustive Testing, as the name suggests is very exhaustive. Exhaustive testing means to test every component in the application with every possible number of inputs. According to Principles of testing Exhaustive Testing is Impossible because exhaustive testing requires more time and effort to test the application for all possible number of inputs. This may lead to high cost and delay in the release of the application.

Q55. What is Gray Box Testing?

Grey box testing is the hybrid of black box and white box testing. In gray box testing, test engineer has the knowledge of coding section of the component and designs test cases or test data based on system knowledge. In this tester has knowledge of code, but this is less than the knowledge of white box testing. Based on this knowledge the test cases are designed and the software application under test treats as a black box & tester test the application from outside.

Q56. What is Scalability Testing?

Scalability testing is testing performed in order to enhanced and improve the functional and performance capabilities of the application. So that, application can meets requirements of the end users. The scalability measurements is done by doing the evaluating the application performance in load and stress conditions. Now depending upon this evaluation we improve and enhanced the capabilities of the application.


Q57. Can you define test driver and test stub?

• The Stub is called from the software component to be tested. It is used in top down approach.
• The driver calls a component to be tested. It is used in bottom up approach.
• Both test stub and test driver are dummy software components.

We need test stub and test driver because of following reason:

• Suppose we want to test the interface between modules A and B and we have developed only module A. So we cannot test module A but if a dummy module is prepare, using that we can test module A.
• Now module B cannot send or receive data from module A directly so, in these cases we have to transfer data from one module to another module by some external features. This external feature used is called Driver.

Q58.What is good design?

Design refers to functional design or internal design. Good internal design is indicated by software code whose overall structure is clear, understandable, easily modifiable, and maintainable; is robust with sufficient error-handling and status logging capability, and works correctly when implemented. Good functional design is indicated by an application whose functionality can be traced back to customer and end-user requirements.

Q59. What makes a good QA or Test manager?

A good QA or Test manager should have following characteristics:

• Knowledge about Software development process
• Improve the teamwork to increase productivity
• Improve cooperation between software, test, and QA engineers
• To improvements the QA processes.
• Communication skills.
• able to conduct meetings and keep them focused

Q60. How does a client or server environment affect testing?

There are lots of environmental factors that affect the testing like speed of data transfer data transfer, hardware, and server etc while working with client or server technologies, testing will be extensive. When we have time limit, we do the integration testing. In most of the cases we prefer the load, stress and performance testing for examine the capabilities of the application for the client or server environment.